Get an automatic quality score (0-100), noise floor analysis, pitch detection, and audio recording. No download needed, 100% private.
Now that you've tested your mic, find out your full vocal range with our interactive Vocal Range Test. Free, with piano keyboard and note display.
Take the Vocal Range Test →Some links below are affiliate links. We may earn a small commission at no extra cost to you. Learn more.
We use a Shure SM7dB dynamic microphone, an Audient iD14 audio interface, Kali Audio LP-6 studio monitors, and a Kali Audio WS-6.2 subwoofer. This professional setup ensures accurate and reliable microphone testing results.
Every product was chosen after extensive research and real-world testing. Here's our complete signal chain: SM7dB → XLR → Audient iD14 → USB-C → Computer → USB-C → Audient iD14 → TRS → WS-6.2 Sub → XLR → LP-6 Monitors.
Dynamic microphone with built-in preamp. No external preamp or cloudlifter needed. Exceptional for speech, podcasting, streaming, and vocals. Comes with an XLR cable included — plugs straight into the Audient iD14.
Check on Amazon →Premium USB-C audio interface with class-leading converters. Two mic preamps (XLR) and TRS outputs for studio monitors. Connects to your computer with ultra-low latency and studio-grade sound quality.
Check on Amazon →6.5-inch studio monitors with flat frequency response for accurate audio monitoring. Honestly, we also picked them because they look stunning on a desk. Connected to the Audient iD14 via TRS cables (left and right output).
Check on Amazon →Dual 6.5-inch studio subwoofer that extends our frequency response down to 27 Hz. Essential for accurately monitoring bass content and low-end microphone performance. Pairs perfectly with the LP-6 monitors.
Check on Amazon →The Shure SM7dB comes with an XLR cable in the box. Plugs straight into one of the two XLR inputs on the Audient iD14. No additional purchase needed.
Balanced 1/4" TRS cables connect the Audient iD14's left and right monitor outputs to the Kali WS-6.2 subwoofer inputs. Not included — need to buy separately.
Check on Amazon →XLR cables connect the Kali WS-6.2 subwoofer outputs to the LP-6 monitors (left and right). The sub handles bass management and passes the signal through to the speakers. Not included — need to buy separately.
Check on Amazon →Click "Start Test," allow microphone access, and speak. You'll see real-time audio levels, pitch detection, and a quality score in under 3 seconds — no download required.
Testing your microphone takes less than 30 seconds. Our tool runs entirely in your browser using the Web Audio API, so your audio never leaves your device.
Press the "Start Microphone Test" button above.
Grant microphone permission when your browser prompts you.
Talk into your microphone and watch the waveform respond.
Review your quality score, pitch detection, and device info.
Your microphone quality score (0-100) is calculated from four factors: volume level, background noise, signal clarity (SNR), and frequency response. Here's what the scores mean:
This is not just a simple level meter. Our microphone test runs a full automatic audio analysis and gives you actionable results:
Check browser permissions, select the correct input device, close other apps using your mic, and update your audio drivers. These four steps fix 95% of microphone issues.
If your microphone isn't detected or isn't producing sound, try these detailed fixes:
Click the lock/info icon in your browser's address bar and make sure microphone access is set to "Allow" for this site. In Chrome, go to Settings → Privacy → Site Settings → Microphone and verify that this site isn't blocked.
If you have multiple audio inputs (built-in mic, headset, USB mic), make sure the correct one is selected. Use the dropdown in the tool above to switch between available devices. Also check your operating system's sound settings to verify the default input device.
Applications like Zoom, Microsoft Teams, Discord, and Skype can exclusively lock your microphone. Close these applications completely (check the system tray) and try again. On Windows, you can check which apps are using your mic in Settings → Privacy → Microphone.
Outdated audio drivers can cause microphone issues. On Windows, open Device Manager, expand "Audio inputs and outputs", right-click your mic, and select "Update driver". On macOS, audio drivers are updated through system updates. For USB microphones, check the manufacturer's website for the latest drivers.
Check for physical mute buttons on your headset or microphone. Also check your operating system's volume mixer: on Windows, right-click the speaker icon → Open Sound Settings → Input. On macOS, go to System Preferences → Sound → Input. Make sure the input volume isn't set to zero.
Modern browsers require HTTPS for microphone access. If you see "http://" in the address bar, the microphone API won't work. Make sure you're accessing this site via "https://". The only exception is localhost for development purposes.
The three main microphone types are dynamic (rugged, noise-rejecting), condenser (sensitive, detailed), and USB (plug-and-play, no interface needed). Each suits different recording situations.
Choosing the right microphone depends on your use case. Here are the main types and what they're best for:
Dynamic mics are rugged and great at rejecting background noise. They don't need external power and are ideal for live performance, broadcasting, and noisy environments. Popular example: Shure SM7B.
Condenser mics are more sensitive and capture more detail, making them perfect for studio recording, podcasting, and vocals. They typically need phantom power or USB power. Popular example: Rode NT-USB Mini.
USB mics plug directly into your computer with no audio interface needed. They're the easiest option for beginners and are great for video calls, gaming, streaming, and home recording. Popular examples: Blue Yeti, Fifine K669.
Your privacy matters. This microphone test processes all audio locally in your browser using the Web Audio API. No audio data is ever transmitted, stored, or recorded on any server. When you close the page, all data is gone. We don't use cookies for tracking, and there are no hidden uploads.